Rehab Balance, Руководство пользователя

Страница: 10 / 26

10
HD Balance | Manual
3.4 Push bar
HEIGHT ADJUSTMENT OF THE PUSH BAR:
- Grip the push bar (a in diagram 10) with one hand.
- Press in one snap lock (1 in diagram 11) and pull the push bar up on
the same side.
- Hold the bar up and push the second snap lock (2).
- Set the push bar to the desired position.
- Ensure that both snap locks have sprung out into the holes.
- Check brake and control cables run freely and are not subject to
damage. They should run along the back tube.
3.5 Separate operating handles
The wheelchair can alternatively be equipped with separate operating
handles (b), Diagram 10.
HANDLE HEIGHT ADJUSTMENT:
- Loosen the screws, 1 & 2 in Diagram 11.
- Move the operating handles vertically to the desired position and
tighten the screws.
- Make sure the screws are securely tightened.
- Check brake and control cables run freely and are not damaged.
They should run along the back tube.
3.6 Covers / Cushions
Seat and back cushions are attached to the wheelchair with Velcro and are therefore easily removable
and interchangeable. Alternative cushions and upholstery come, for example, with incontinence
protected upholstery.
- Check cushions regularly per the maintenance directions. Worn out cushions can cause pressure sores.
POSITIONING OF SEAT CUSHION
- Align the cushion over the seat plate and place it straight down. The cushion is slightly higher at the
front and has a label at the rear. The underside is black and smooth.
- Make sure the cushion is secure.
REMOVING THE SEAT CUSHION:
- Take the front edge of the cushion and pull straight up.
POSITIONING OF BACK CUSHION:
- Attach the straps (1) in the upper part of the back cushion around the
flexi-back’s tubes (2) with Velcro as shown in Diagram 12. If a hard back
is used, attach the Velcro to the back of this.
- Fold the cushion straight forward and press firmly against the back
plate according to Diagram 13.
- Make sure the cushion is secure.
REMOVAL OF BACK CUSHION:
- Take hold of the lower edge of the cushion and pull up.
- Loose the straps.
REMOVABLE COVER
Both the seat and back cushions’ covers are fitted with a zipper for easy
removal and recovering. Washing instructions are on the label.
Diagram 10.
Push bar and
separate operating handles.
a
b
Diagram 11.
The snap locks
(push bar) alternatively the
screws (separate operating
handles) position.
1 2
Diagram 12.
Fastening
straps around the flexi-frame.
1
1
2
Diagram13.