13
z
electric motor of OMB magnetic tape drive,
z
indicators of MT position,
z
MOV illuminator,
z
inductor .
z
Switching the PC on, loading the OS, initializing software . Automatic check-up of the
state / pre-installation of OMB equipment .
z
MT is manually inserted into the OMB buffer . Then MT is captured by the magnetic tape
drive and moved to MOV working zone .
z
Step-by-step movement of MT is followed by panoramic stitching of an MOV image .
z
The quality of stitching and its informative value is controlled .
z
MT extraction: direct or reverse rotation depending on the length of the inserted MT strip .
Manual extraction of MT from OMB buffer . The device switches to a stand-by mode .
z
The equipment automatically switches to a stand-by mode when the “Stop” mode lasts
longer than ≈ 5 minutes . Stand-by mode is switched off as soon as a new command is
received .
Magnetic Copying Accessories Set (MCAS)
z
Creating a physical copy (recording information to intermediate flexible magnetic
carrier – magnetic tape) of magnetic stray fields distribution over the object surface .
The copy reflects relief and structural inhomogeneity of the material . Permanent magnets
of the Combination Magnetic Scanner concentrators serve as sources of magnetic stray
fields’ excitation .
z
Demagnetizing magnetic tapes for further use .
z
Arranging, marking, storing and carrying the operative reserve of MT and recorded
magnetic copies .
z
Service functions while performing magnetic copying .
Technical Characteristics
Dimensions of physical
copies:
length
unlimited . Recommended length – 250 mm
width
11 mm (Combination Magnetic Scanner flat concentrator and
Compact Magnetic Scanner)
width
15 mm (Combination Magnetic Scanner rotary concentrator)
width
21 mm (Combination Magnetic Scanner rotary concentrator)
MT cartridge capacity
not more than 10 strips (250 mm long)
MCAS casing dimensions
120x80x40 mm
Weight of the loaded MCAS casing
0,4 kg
CMS dimensions
105x30x30 mm
CMS weight
0,2 kg
Functions
List of main components of the USB-device for MOV:
1.2.2
“device is passive”
(special software is not operating with the device);
“device is active”
(special software is operating with the device);
“MT in the bunker”
(insertion or extraction of MT);
“MT in the tract”
(stitching is in process) .
Status indicators of the USB-device for MOV:
Algorithm of Automatic Magneto-Optical Visualizer operation:
Содержание 7505M
Страница 2: ......
