background image

Specifications

Fluid Compatibility: 

 

LNG, Methane and LN2

Maximum Refueling Pressure: 

 500 PSIG / 34.5 BAR

Maximum System Pressure:

  

500 PSIG / 34.5 BAR

Burst Pressure:

  

> 1,500 PSIG (103.5 BAR)

Rated Flow:

  

50 GPM @ 250 PSIG (LNG)

Nozzle Weight: 

 

10.4 LBS 

Port Size:

  

1” Male SAE 37° Flare (SAE J514) 

 

      (1-5/16 -12 Thread)

Operating Temperature:

  

-320°F to +140°F 

 

 

 

     (-195°C to 60°C)

Meets ISO 12617 requirements.

For Use with Macro Technologies receptacle part numbers 13530, 
13615, 13620, 13705, 13990 and 14050.

Additionally, the nozzle has been verified to function well with other 
manufacturer’s receptacles such as JC Carter receptacle part 
number 62050 and Parker (Hannifin) Kodiak series receptacles. 
We cannot guarantee that these or any other manufacturers will 
continue to make compatible products.

Macro Technologies fully supports the development of National 
and International Standards. We are active in participating in the 
development of these standards.

Key Features

Thank you for purchasing the Macro Technologies CryoMac

®

3 LNG 

(Liquid Natural Gas) Fueling Nozzle (Part No. CryoMac3-50M and 
CryoMac3-50M-S). We know that you will find it safe, easy to use 
and easy to service. Our Patent Pending design solves many of the  
issues that have plagued competitive LNG Fueling Nozzles.

Macro Technologies offers the highest quality product with new–
age technologies to improve safety and ease of use including:

A positive “Vent Position” to release gases trapped 
between the nozzle and receptacle through the Vent 
Holes, which improves safety hen removing the Nozzle.

Ball bearings to lock the Nozzle in place during fueling. 
Balls bearings help to guide the nozzle and let it “roll” 
on and off easily. Light weight design makes the Nozzle 
easier to handle over long work days and easier to slide 
onto the receptacle.

Non-metallic bearings, air gaps, and insulation at key 
points are used to minimize ice issues. Easy access or 
maintenance of the receptacle end seal, poppet assembly 
and the poppet seat. No expensive “clamp dogs” to 
replace.

Reasonable cost while maintaining reliability.
 

Automatic Shutoff when disconnecting.

2

Содержание Macro CryoMac 3















Отзывы: