Warning Installation, usage and maintenance of this product must be in compliance
with all Macro Technologies, LLC Instructions as well as all requirements and
provisions of national and local standards, codes, regulations and laws. Inspection
and maintenance of a periodic basis is essential. Only qualified personnel should
perform installation and maintenance. Be sure all instructions are read and
understood prior to installation, operation and maintenance. These instructions
must be passed on to the end user of the valve.
Avoiding the inhalation of, or skin contact with Liquefied Natural Gas (LNG) is
advised. LNG can cause asphyxiation, freeze burns, fire and explosions which
can result in serious injury or death. See the LNG MSDS for specific information
regarding safe handling of LNG. Evacuation of LNG must take place in a well-
ventilated area to insure dispersion. Keep LNG far from open flames or other
sources of ignition to prevent fire or explosion.
Failure to follow the safety warnings may result in
serious injury
1)
Whenever operating the LNG quick connect fueling Nozzle, be sure to wear the proper
safety clothing consisting of:
Full face shield
Thermal gloves approved for cryogenic use
Cryogenic smock
Solid shoes capable of withstanding cryogenic spill
2)
Read the User’s Manual in its entirety before operating this product.
3)
Make sure the operating space is clear to avoid accidental contact with others.
4)
Do not use the product in any way not described in this manual.
5)
Only use replacement parts provided by Macro Technologies.
6)
Do not operate the product if there is any visible damage.
7)
Stop operation immediately if leakage occurs.
8)
Follow the maintenance schedule as described on page 4-5 of this manual.
Only use Macro Technologies replacement parts when performing maintenance.
i
