IB-HT391-WM-E-073003
AM / FM TUNER CONNECTIONS
1. Insert the audio cables into the AUDIO OUTPUT
L
(left=white) and
R
(right=red) jacks on the back of your
AM/FM TUNER, and into the corresponding AUX INPUT jacks or any available set of input jacks on the back of
your HOME THEATER. This will enable you to hear your stereo AM/FM TUNER through your HOME THEATER
SYSTEM.
2. Make sure the POWER switch on the back of the main unit is at “ON” position. Next press the ON/STANDBY
button on the front of the main set or on the REMOTE to turn the set on (or off).
3. Press the INPUT SOURCE button several times till the AUX indicator lights.
NOTE
: The factory’s default input source is DVD with 5.1 channel sound output. When the set is turned to
ON, the DVD indicator and 5.1 channel indicator will be on and sound will come out of 5 speakers plus
the subwoofer. To change 5.1 channel to 2 channel output, press the SPEAKER CHANNELS button. The
sound will come out of only 2 front speakers plus the subwoofer.
4. Make sure your AM/FM TUNER is on and follow your AM/FM TUNER’s instructions.
5. Go to Page 21 for other detailed instructions.
19
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8 (OR THE QUICK SETUP DIAGRAM SHEET).
