Regent CMDL Series, Инструкция по эксплуатации, Страница: 7 / 28

7
ENGLISH
4 Hour
NIGHT TIME ON then
Motion Activated
Lantern should turn on
automatically at night 100%
brightness for 4 hours, then
reset to regular auto motion
setting for the remainder
of the evening.
NIGHT TIME ON
4 HR
(4 Hours)
Note: Once the lantern has
come on in the selected “Night
Time On” mode, you cannot
change the mode setting until
the next dawn. The lantern will
operate in the first “Night Time
On” mode selected
(2 hour, 4 hour, or 6 hour),
even if changed.
Keep the power to the
fixture on.
6 Hour
NIGHT TIME ON then
Motion Activated
Lantern should turn on
automatically at night 100%
brightness for 6 hours, then
reset to regular auto motion
setting for the remainder
of the evening.
NIGHT TIME ON
6 HR
(6 Hours)
Note: Once the lantern has
come on in the selected “Night
Time On “ mode, you cannot
change the mode setting until
the next dawn. The lantern will
operate in the first “Night Time
On” mode selected (2 hour, 4
hour, or 6 hour), even if changed.
Keep the power to
the fixture on.
6 Hour
NIGHT TIME ON then
Motion Activated
Lantern should turn on
automatically at night 100%
brightness for 6 hours, then
reset to regular auto motion
setting for the remainder
of the evening.
NIGHT TIME ON
6 HR
(6 Hours)
Note: Once the lantern has
come on in the selected “Night
Time On “ mode, you cannot
change the mode setting until
the next dawn. The lantern will
operate in the first “Night Time
On” mode selected (2 hour, 4
hour, or 6 hour), even if changed.
Keep the power to
the fixture on.
Mode of
operation:
Set slide switch
on sensor to:
How to set
power switch:
Return to Auto
or NIGHT TIME ON settings
(motion activated)
From any of the
above settings.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON MODES
Turn the power “OFF”
for at least 90 sec., then
back “ON”.
Continuous Override Mode
(standard
floodlight setting)
Lantern should stay on
continuously both day and night
(must be reset manually).
TEST
Turn the power “OFF”
for 5 seconds then
back “ON.”
Dusk to Dawn Setting
Override Mode
(activated only at night)
Lantern should stay on 100%
brightness from dusk to dawn
and then reset to the AUTO
or NIGHT TIME ON
setting next dawn.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON MODES
Turn the power “OFF”
for 5 seconds then
back “ON.”