Regency G51 UltraGlow
14
INSTALLATION
Log 02-51 was removed to show
placement of Log 02-52.
Bracket
Cutout
02-52
02-97
9)
Place the embers lava on the front of the burner tray as shown in
the circled areas in the picture below.
Ensure not to block the burner ports.
Embers Lava
02-95
02-50
02-55
02-52
02-97
02-51
02-96
10)
Test fire to ensure proper light off (make sure flame flows smoothly
from one end of burner to the other). If there is any flame hesitation,
check that area for any blockage of the burner ports.
11)
Install screen door as per instructions in this manual.
