Regency Cascades Series Скачать руководство пользователя страница 2

Страница: 2 / 48

F2500 Regency Freestanding Woodstove

Thank-you for purchasing a

REGENCY FIREPLACE PRODUCT.

The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about
your product that are not covered in this manual, please contact the

REGENCY DEALER

in your area.

“This wood heater has a manufacturer set minimum low burn rate that must not be altered. It is against federal regulations to alter this

setting or otherwise operate this wood heater in a manner inconsistent with operating instructions in this manual.” Failure to follow
the manual details can lead to smoke and CO emissions spilling into the home. It is recommended to have monitors in areas that are
expected to generate CO such as heater fueling areas.

“U.S. ENVIRONMENTAL PROTECTION AGENCY Certified to comply with 2020 particulate emission standards using cord wood.”

Tested to ASTM E3053. Model Regency F2500 – 1.0g /hr.

“This manual describes the installation and operation of the Regency F2500 catalytic equipped wood heater. This heater meets the 2020 U.S. En-
vironmental Protection Agency’s cord wood emission limits for wood heaters. Under specific test conditions this heater has been shown to deliver
heat at rates ranging from 14,746 BTU/hr. to 50,349 BTU/hr.” Efficiency is determined using the B415 method resulting in lower and higher heat
values. This heater generates the best efficiency when operated using well-seasoned wood and installed in the main living areas where the majority
of the chimney is within the building envelope. "This wood heater contains a catalytic combustor, which needs periodic inspection and replacement
for proper operation.

It is against federal regulation to operate this wood heater in a manner inconsistent with operating instructions in this manual, or if the
catalytic element is deactivated or removed."

CAUTION: BURN UNTREATED WOOD ONLY. OTHER MATERIALS SUCH AS WOOD PRESERVATIVES, METAL FOILS, COAL,
PLASTIC,GARBAGE, SULPHUR OR OIL MAY DAMAGE THE CATALYST

"This heater is designed to burn natural wood only. Higher efficiencies and lower emissions generally result when burning air dried seasoned hard-
woods, as compared to softwoods or to green or freshly cut hardwoods."

DO NOT BURN:

• Treated wood

• Lawn clippings or yard waste

• Manure or animal remains

• Coal

• Materials containing rubber including tires

• Saltwater driftwood or other previously salt

water saturated materials

• Garbage

• Materials containing plastic

• Unseasoned wood

• Cardboard

• Waste petroleum products , paints or paint thinners or asphalt

products

• Paper products, cardboard, plywood or par-

ticle board. The prohibition against burning
these materials does not prohibit the use
of fire starters made from paper, cardboard,
saw dust, wax and similar substances for the
purpose of starting a fire in a wood heater.

• Solvents

• Materials containing asbestos

• Colored Paper

• Construction or demolition debris

• Trash

• Railroad ties

Burning these materials may result in release of toxic fumes or render the heater ineffective and cause smoke.

The authority having jurisdiction (such as Municipal Building Department, Fire Department, Fire Prevention Bureau, etc.) should be con-
sulted before installation to determine the need to obtain a permit.

This unit must be connected to either a listed factory built chimney suitable for use with solid fuels and conforming to, ULC629 in Canada or UL-
103HT in the United States of America. or code approved masonry chimney with flue liner.

F2500 is tested and certified to ULC-S627-00 and UL1482-2011 (R2015).

SAVE THESE INSTRUCTIONS