Regency Bellerive Fireplace Insert
11
INSTALLATION
HEATSHIELD, FACEPLATE & FAN INSTALLATION
1)
Remove the door from the unit by lifting it up off the hinges.
2)
Position the heat shield fl ush against bottom front of fi rebox on
the inside of the unit.
Note
: Heat shield
must
be fi tted into place to protect the fan.
3)
Position the faceplate up against the unit by sliding the left side of the
fascia in behind the door hinges and align the 4 screw holes with the
holes in the fi rebox. Secure in place using 2 screws on top.
4)
Install the fan fascia by aligning the bottom screw locations with
the bottom faceplate. See page 13 for fan wiring diagram.
5)
Re-install door.
Fan Fascia
6)
Install the draft plate cover by sliding the tabs into the tab brackets
on the inside top of the fi rebox, ensure the damper control rod fi ts
thru the opening in the draft plate cover.
Draft Plate Cover
Damper
Control Rod
Heat shield
7)
Install knob on damper control rod.
