background image

32     | 

Regency CI1203 / CI1253 Wood Cast Insert

32    |

warranty

Limitations of Liability:  

The original purchaser’s exclusive remedy under this warranty, and FPI’s sole obligation under this warranty, 

express or implied, in contract or in tort, shall be limited to replacement, repair, or refund, as outlined above.  IN 

NO EVENT WILL FPI BE LIABLE UNDER THIS WARRANTY FOR ANY INCIDENTAL OR CONSEQUENTIAL COMMERCIAL 

DAMAGES OR DAMAGES TO PROPERTY.  TO THE EXTENT PERMITTED BY APPLICABLE LAW, FPI MAKES NO EXPRESS 

WARRANTIES OTHER THAN THE WARRANTY SPECIFIED HEREIN.  THE DURATION OF ANY IMPLIED WARRANTY IS 

LIMITED TO DURATION OF THE EXPRESSED WARRANTY SPECIFIED ABOVE.  IF IMPLIED WARRANTIES CANNOT BE 

DISCLAIMED, THEN SUCH WARRANTIES ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. 

 

Some U.S. states do not allow limitations on how long an implied warranty lasts, or allow exclusion or limitation of 

incidental or consequential damages, so the above limitations or exclusions may not apply to you. 

 

Customers located outside the U.S. should consult their local, provincial or national legal codes for additional 

terms which may be applicable to this warranty. 

 

How to Obtain Warranty Service:

 

Customers should contact the authorized selling dealer to obtain warranty service.  In the event the authorized 

selling dealer is unable to provide warranty service, please contact FPI by mail at the address listed below.  Please 

include a brief description of the problem and your address, email and telephone contact information.  A 

representative will contact you to make arrangements for an inspection and/or warranty service. 

 

Canadian Warrantor: 

 

FPI Fireplace Products International Ltd.

 

6988 Venture St. 

Delta, British Columbia 

Canada, V4G 1H4 

 

U.S. Warrantor:  

 

Fireplace Products U.S., Inc.

 

PO Box 2189 PMB 125 

Blaine, WA 

United States, 98231 

 

Or contact the Regency Customer Care Centre at 1-800-442-7432 (phone) / 604-946-4349 (fax) 

 

Product Registration and Customer Support: 

Thank you for choosing a Regency Fireplace.  Regency strives to be a world leader in the design, manufacture, and 

marketing of hearth products. To provide the best support for your product, we request that you complete a 

product registration form at 

http://www.regency-fire.com/Customer-Care/Warranty-Registration.aspx

 within 

ninety (90) days of purchase. 

Revision Date: December 2016 

Regency Wood Products Warranty 

 

Содержание Alterra CI1203





































Отзывы: