background image

Model: I31-NG3
  

I31-LPG3

Owners &

Installation

 

Man

ual

09/10/12

LISTINGS AND CODE APPROVALS

These gas appliances have been tested in 
accordance with AS4553, NZS 5262 and 
have been certifi ed by the Australian Gas 
Association for installation and operation as 
described in these Installation and Operating 
Instructions.

Your unit should be serviced annually by 
an authorised service person.

918-001d

I31-3 Gas Inbuilt

FOR YOUR SAFETY
What to do if you smell gas:

 

Do not try to light any appli-
ance

 

Do not touch any electrical 
switch: do not use any phone 
in your building.

  Immediately call your gas 

supplier from a neighbour's 
phone. Follow the gas sup-
plier's instructions.

 

If you  cannot reach your gas 
supplier, call the fi re depart-
ment.

WARNING:  
Improper installation, adjustment, altera-
tion, service or maintenance can cause 
injury or property damage. Refer to this 
manual. For assistance or additional in-
formation consult an authorised installer, 
service agency or the gas supplier.

FOR YOUR SAFETY
Do not store or use gasoline or other fl am-
mable vapours and liquids in the vicinity of 
this or any other appliance.

Installation and service must be performed 
by an authorised installer, service agency or 
the gas supplier.

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Содержание I31-LPG3





























Отзывы: