Option: Liquid to Air Heat Exchanger TC.LAE
Installation and Commissioning
REGATRON
Performance. Precision. Quality.
TC.ACS - Device Manual (V04.60) - 26.4.2022
56 / 66
11.3.6 Starting the Pump of the TC.LAE
11.3.6.1 Safety Advice
11.3.6.2 Prerequisites
For starting the pump of the TC.LAE, the following must be given:
• The cooling circuit has been set up (see
).
• The TC.LAE is connected to the mains (see
).
11.3.6.3 Procedure
To start the pump of the TC.LAE, do the following:
Switch on the pump switch on the rear side (
).
Switch on the pump switch on the front side (
).
DANGER
Electric shock!
Avoidance:
- Device and load must be isolated against accidental contact.
- No maintenance work must be carried out.
- Warning signs must be used and the area must be cordoned off.
CAUTION
Possible damage of the device!
When the pump of the TC.LAE runs dry, it will be damaged.
Avoidance:
Never let the pump run dry.
