Before Assembly
I
E
F
G
H
I
J
MODEL NO.
MAX SIZE
1160
29 38.5 in
A
B
C
D
E
F
G
H
I
J
Left Side Frame Half
(1)
Gate Door Panel
(1)
Right Side Frame Half
(1)
6” Extension
(1)
Threaded Spindle Rods
(4)
Wall Cups
(4)
1” Wall Mount Screws
(4)
Frame Assembly Screws
(2)
Hex Key
(1)
PLEASE CHECK TO MAKE SURE YOU HAVE THE FOLLOWING PARTS:
NOTE
Spring Loaded Upper Door
Mounting Pin
(1)
English
• Never use more than two extensions per side of gate.
• If hardware mounting to a surface other than drywall or
wood, please consult with a professional about installation.
• Base locks are to be used at all times, on both sides of the
gate.
To remove your gate from the wall, rotate the adjustment
wheels on each of the (4) threaded spindle rods to
depressurize the gate from its doorway or opening. Then,
gently pull or push the gate free from its doorway or opening.
Periodically check the gate for signs of damage, wear, or
missing components. Do not use if any part is missing,
worn or damaged. Check the gate regularly to ensure all the
hardware and mountings are tightened. Do not use abrasive
cleaners or bleach. Clean by sponging with warm water and
a mild detergent.
REMOVING YOUR GATE FROM THE WALL
IMPORTANT
CARE AND MAINTENANCE
BEFORE USING PRODUCT
Read and follow all instructions carefully to ensure that
your gate and extensions are properly installed. Improper
installation could result in the gate becoming unstable or
dislodged from the doorway. Always make sure the
extension is securely attached to the gate before using.
The safety of your child is your responsibility. Please keep
these instructions for your reference.
A
B
C
D
