Regal LS4C, Руководство пользователя

Страница: 10 / 210

10
Vessel Cruise Checklist

Obtain a current weather update.

Hoist the boat & periodically inspect the hull bottom and propellers for damage. Ma-
rine growth such as barnacles will affect performance and fuel efficiency. Check sac-
rificial anodes located on the propulsion unit, transom and engine. Replace anode if
less than 2/3 remaining.

Check the electrical system and all safety related equipment. Carry extra fuses. En-
sure they are of the proper capacity and type.

If your boat has been in the water, run the bilge pump until the flow of water stops.

Check to see that all bilge water has drained and the drain plug is installed before
launching If your boat if it has been out of the water.

Check that all required safety equipment is on board and in good working condition
Examples include personal flotation devices (PFD’s), horn, bell, hand held fire extin-
guishers, and visual distress signals.

Check fuel level. Fuel tanks should be filled to slightly less than capacity. Allow for fuel
expansion. Remember the “one third rule”.

Open engine compartment. Inspect for fuel odors and visible leaks in the fuel, oil, cool-
ant, exhaust and power steering systems.

Check all fuel filters for the presence of water.

Check fluid levels of engines, drives and generator (if applicable).

Inspect engine for cracked hoses, worn or loose belts, and loose hardware.