F O R M
TorqTaper
®
Plus Helical Shaft Mount
Speed Reducers Installation
and Maintenance Manual
9191E
Revised
September 2015
Power Transmission Solutions
Regal Beloit America, Inc.
7120 New Buffington Road
Florence, KY 41042
Application Engineering: 800 626 2093
www.RegalPTS.com
•
Periodic inspections should be performed. Failure to perform proper maintenance
can result in premature product failure and personal injury.
•
All electrical work should be performed by qualified personnel and compliant with
local and national electrical codes.
•
Read and follow all instructions carefully.
•
Disconnect and lock-out power before installation and maintenance.
Working on or near energized equipment can result in severe injury or death.
•
Do not operate equipment without guards in place. Exposed equipment can
result in severe injury or death.
•
Never lift the reducer by the input shaft. Lifting lug should only be used to lift the
weight of the reducer. Do not use lifting lug to lift attached assemblies.
•
Reducer shipped without oil. Fill to proper level before operation to avoid
damage and/or personal injury. Do not use lubricants with anti-wear/extreme
pressure additives in units with internal backstops - these additives decrease the
backstops’s ability to prevent reverse rotation and will result in backstop failure
which could cause personal injury.
C-Face TorqTaper Plus
Hydraulic TorqTaper Plus
Shaft Mount TorqTaper Plus
