Regal-Seton APPROX 4, Руководство пользователя

Страница: 9 / 10

- 9 -
Unit maintenance
Approx 4 is a closed system, maintenance works are not required.
Remedying faulty operation:
Before you start searching the problem, make certain that all the circumstances for unit
operation are given.
It occurs in dimmers that the fuse (T 6,3A) can not protect the semiconductor properly when
the filament tears. In that case at the power-block side removing the covering and the bolts, on
the triac-block which can be pulled out with the aid of the card enclosed, the faulty
semiconductor can be changed.
Removing the bold the whole power-block can be pulled out by means of the built-in M4 nut.
The power-block with the exception of parts in the socket can not be repaired (for operating
bigger systems a spare block is recommended).
In case of a fault in the control-block or other faults contact your retailer!
Technical specifications
Power required: 170-240V 50Hz AC
Power absorbed by the electronics: 1,5VA
Power output: 4x1380W, Total: 4000W
Control-signal: DMX 512, 5-pin XLR connector (1.GND; 2.- ; 3.+)
Unit frame: eloxed aluminium
Display: 4 digit, 7 segments LED/red
Controls: 4 pc of ITT buttons
Labels: engraved
Operating temperature: -10°C – 105°C
Protection: IP34
Dimensions: 1498 x 40 x 60 mm
Weight: 2930g
CE
Accesories
1 pc of Neutric Power Conn. power connector
1 pc of 5-pin XLRm connector
1 pc of 5-pin XLRf connector
1 pc of user’s manual
1 pc of card (for changing triacs)
Serial number of the unit: .....................................
Date of sell: ............................................ ................................
Signature
Stamp
Manufacturer
Regal-Seton Bt.
1094 Budapest, Márton utca 35/a.