Regada SO 2-Ex, Инструкции по установке, обслуживанию и техническому обслуживанию

Страница: 20 / 44

18 SO 2-Ex
•
reset the EA back by the stroke where the “Closed” position is to be indicated and turn the cam
(30) counter clockwise until switch S6 switches over (26);
•
once the EA is adjusted manually tighten the central milled nut (23) to lock the cams and tighten
the lock nut (22) while simultaneous holding the milled nut;
•
swing the position indicator discs (31) for the given number of revolutions against the gauge mark
on the top cover sight;
•
once of the position- signalling unit is adjusted also adjust the position Transmitter, converter or
position control device, if necessary (according to the accessories of the EA).
There is an option of bi-directional signalling at all operating stroke time, i.e. 100 %.
26
27
24
25
23
22
30
28
29
31
Fig.3