12
3PCLIOBUX631TA
Inappropriate containers
Never use containers:
■ Steel normal end
■ Glass
■ clay
■ Copper
■ Aluminium
Characteristics of the base of the vessel
The characteristics of the base of the receptacles may affect the homogeneity of the cooking result. Contai-
ners made of materials that promote the spread of heat, such as containers “sandwich” of stainless steel,
distribute the heat evenly, saving time and energy.
No vessel or of inadequate size
If you place a pan on the cooking zone selected or if this is not the material or the right dimensions, the
degree of cooking of the cooking zone displayed in the indicator flashes. Why stop flashing, place a suitable
container. If you delay beyond 90 seconds, the cooking zone switches off automatically.
Empty containers or thin base
Do not heat empty containers and do not use pans with a thin base. The hob is equipped with an internal
system of safety, but an empty container can heat up so quickly that the function of “automatic deactivation”
may not have time to react, with the consequent attainment of a very high temperature. The base of the
vessel could get to the glass melt and damage the floor. In that case, do not touch the pan and turn off the
hotplate. In case of failure after cooling, contact Technical Services.
Detection of the container
Each zone of an induction cooking, has a minimum limit of detection of the receptacle which varies depen-
ding on the material of the container that is being used. For this reason, it must use the cooking zone most
appropriate to the diameter of the container.
Induction Cooking
Turning on the Cooktop
Press the button “A” to turn on the cooktop.
All display areas for cooking will turn to standby .
The control unit will remain active for a time of 10 seconds. If within this period will not select any area of the
kitchen stove will shut off automatically.
Turning cooking areas
Press or drag the button
E
to turn the plate and from minimum to maximum power. Adjust the power by pres-
sing the desired button and slider
E
, this works or how to drive a common key.
The power of the single zone can be adjusted in 9 different positions, and will be displayed in its bright
display with a number from “1 to 9.”
Residual heat
If the temperature of a cooking zone is still high (greater than 50 °) after being turned off, the display relating
to that area is shown (residual heat). The display disappears when there is no risk of burns.
Recognition pans
If on one of the display, which indicates the power of a cooking zone, the symbol should appear , this means
that:
1) the container used is not suitable for induction cooking.
2) the diameter of the pot used is less than that allowed by the appliance.
3) on the plate is not present no pot.
Timer
This feature allows you to set the time (from 1 minute to 99 minutes) to automatically turn off the cooking zone
selected.
Enable the timer by pressing the keys H and G.
Press either button to adjust the cooking time is shown on its display. Select the desired cooking area with a
bar of buttons E and a LED under the display includes the area activated, indicating the selection. Set the po-
wer of the area between 1 and 9 with the same keys E. Set at this point, the shutdown time required using the
UK
