Installation and assembly
10 — English
Reflex Exvoid/Exdirt V — 06.2017
4
Installation and assembly
CAUTION
Risk of burns
Escaping hot medium can cause burns.
•
Maintain a sufficient distance from the escaping medium.
•
Wear suitable personal protective equipment (safety gloves and goggles).
4.1
Notes
The following items must be considered when assembling and installing the equipment:
•
Do not install the device above sensitive components or close to electrical plant.
•
Perform installation in dry and frost-proof locations.
•
The flow direction is not pre-determined.
•
The component is intended for vertical installation with standard installation lengths F1(DIN 3202-1) according to DIN EN 558:2012-
03.
•
When installing ensure there are no residual stresses.
– Any stresses that may occur in some cases must be countered by appropriate constructive actions. Stresses may be caused by
temperature effects, for example.
•
Ensure the device is readily accessible in its place of installation.
•
Ensure sufficient bearing capability of the installation site.
– This applies to filling the separator with water in particular.
– If necessary additional structural measures may be required to ensure adequate load bearing capacity.
•
The device is not a load-bearing structural element.
– By default, the calculation of the vessels does not take lateral acceleration forces into account. Avoid alternating stresses such
as pressure shocks, abrupt pressure changes, or strong vibrations.
•
Use only approved transport and lifting equipment.
•
After installing insulation, attach the (adhesive) nameplate on the outside so that it is readily visible.
•
Flush the system thoroughly after installation.
Note!
•
Observe the correct positioning of the add-on components so that they function correctly.
•
We recommend fitting shut-off valves upstream and downstream of the device to simplify maintenance.
Note!
•
Consider the static forces acting on the pipe system with reference to the force moments when installing in vertical
pipelines.
Содержание D 100 V
