ADJUSTMENTS
Once a new sponge has been fitted it will need to be aligned
Start machine on slow revs. This will allow sponge to centralise.
If the sponge runs to the left or right it will need to be adjusted to do this.
Stop Engine
To adjust the sponge tension correctly, pull the sponge to one side, make adjustments by turning the star
screw
G
, and opening lever
C
. Please allow the sponge tape to run through several times, as it takes
some time to react
Run and test alignment. Repeat this operation until sponge runs central
PRESSURE ON THE PAVING SURFACE
The pressure the sponge puts on the ground can be adjusted by the hand wheel (under the
handlebar). The pressure should not be too much on the surface, otherwise the sponge has a strong
wear and the joints are heavily washed out.