TECHNICAL
Machine
SWM680P
Sponge
360 x 44mm
Weight
80kg
Motor
petrol
Work rate
200m2/hr
OPERATING PRINCIPLES
The Schwammfix machines are for cleaning cements and grouts from quarry tiles, external paviers,
natural stone and granite sets
The grout is pumped or poured into the joints, the Schwammfix machine is used to pass over the newly
grouted area and to sponge off the residue leaving a clean surface and compact joint
The machines will mechanically do the time consuming “hands and knees” job of removing cementitious
and epoxy grout
The machines use a continuous sponge band that is fed through a water bucket and rollers; the excess
sludge and water is squeezed out leaving the sponge clean to repeat the cycle
Finishing rates up to 200m²/hr.
CHANGING THE WATER BUCKET
1.
Switch off engine
2.
Press
D
down and move
E
to the right side
3.
Lift the complete wringer pressure roller
D
up and click it into the holder
4.
Then pull the water bucket on both sides out of the machine
5.
Dispose of dirty water, clean bucket, refill with clean water up to 3½
"
from bottom. Do not overfill
6.
Loosen pressure roller
D
from the holder
7.
Press down pressure
D
and slew the pressure roller with the clamping pin
E
into the centre so you
can tighten part
D