18
5. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
6. A steam cleaner is not to be used.
Connecting the hob to the mains power supply
1. If the cable is damaged or needs replacing, this should be done by an
after-sales technician using the proper tools, so as to avoid any accidents.
2. If the appliance is being connected directly to the mains supply, an omnipolar
circuit breaker must be installed with a minimum gap of 3mm between the
contacts.
3. The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
The power supply should be connected
via a double pole switched outlet with 3mm
contact clearance. The circuit must be protected by a 30amp fuse
