Installation Instructions
19K Sidewinder
TM
©
2009, 2016 Cequent Performance Products - Printed in Mexico
Sheet 7 of 12
SW19KIN
10/25/16
Rev. K
Form: F205 Rev A 5-6-05
Universal Wedge Orientation:
1. Remove (2) ¾” Lock-Out bolts and hardware from the rear of the pin-box (figure 17).
2. Remove the universal wedge from it’s storage location by removing (2) 5/8-11 X 1 3/4” bolts and conical washers.
Activating the Sidewinder
TM
Feature:
Figure 18
Wedge In Storage Location
Note: The universal wedge is supplied with the unit and provides a lockout for many different fifth wheel hitches.
Cequent Performance Products offers custom wedges designed for specific fifth wheel hitches, check with your RV
dealer or call CPP customer service at 1-800-632-3290 to see if we offer a custom wedge for your hitch application
for purchase. If a custom wedge is available for your hitch application, CPP recommends replacing the universal
wedge with a custom wedge to provide the best fit for your hitch. The universal wedge should remain with the unit
as it may be necessary if breakdown occurs to fit a tow vehicle other than your own.
Figure 19
Wedge In Position for Sidewinder
TM
Feature Activation
Before installing the universal wedge in position it is necessary to decide the best orientation for your hitch
application. This can be done by referencing the diagrams below.
Orientation for Reese/Draw-Tite/Hidden
Hitch Select Series, Pro Series, Husky &
similar style fifth wheel heads.
Relief Must Face Down for
these applications in order
to clear the jaw.
Figure 20
Figure 21
Orientation for Reese/Draw-Tite/Hidden
Hitch Signature Series, Elite Series, &
Select Plus, Reese Titan 16K & 20K, B&W
and similar style fifth wheels.
