50
b) Replacing the Landing Struts
The landing struts (1) are screwed to the motor carriers
(2) from below.
Use a suitable screwdriver to loosen the attachment
screw (3) and remove the landing strut.
Attach the new landing strut to the motor carrier and
screw on the strut again.
Important!
Do not tighten the screw too far so that the
landing disc can still align itself after putting
down the quadrocopter and the entire ring will
touch down on the ground.
When replacing mechanical parts use only original spares available from the manufacturer.
The spare parts list is located on our website www.conrad.com in the download section to the respective
product.
Figure 17
Содержание Sky Roller
Страница 106: ...106 ...
Страница 107: ...107 ...