38
10. Commissioning of the Quadrocopter
a) Charging the Flight Battery
Attention, important!
Even if this is possible easily when operating the model later, never charge the flight battery when installed.
Always remove the flight battery from the model for recharging! Place the flight battery on a fire-proof under
-
ground when charging and do not charge the battery unsupervised.
The flight battery is charged with the enclosed USB charging cable. For this, the charging cable is connected to a USB
socket of a computer/notebook or to a conventional USB plug-in charger.
Charging:
Connect the flight battery (1) with the connector protec
-
ted against polarity reversal of the USB charging cable
(2). Work with the required care and do not apply any
unnecessary force.
Once the USB plug of the charger is connected to a
USB socket of a computer/notebook or a USB plug-in
charger, charging commences automatically.
When charging is completed and the rechargeable bat
-
tery charged correctly, the red charge control LED (4)
in the USB plug lights up.
Disconnect the rechargeable battery from the USB
charging cable at once after charging and pull the USB
plug of the charging cable from the computer/notebook
or plug-in charger.
For photo-technical reasons, the USB charging cable is illustrated in the wound-up state in figure 4. Before
first use, the cable retainer should be opened and the cable unwound.
Figure 4
Содержание Sky Roller
Страница 106: ...106 ...
Страница 107: ...107 ...