24
20. Binding Function
To enable transmitter and receiver to work together, they must be bound by the same digital code. In the delivery state,
transmitter and receiver are aligned with each other and can be used at once. The binding settings must be renewed
mainly after a replacement of the transmitter or receiver or to remove any interferences.
Before you can bind the receiver to the transmitter, check if the transmitter works in the right digital code (see previ-
ous chapter).
To perform the binding procedure, proceed as follows:
• Transmitter and receiver must be in direct proximity (dis
-
tance approx. 50 cm).
• Switch off the transmitter.
• Disconnect any servos that may be connected from the
receiver.
• Connect the enclosed programming plug (1) to the
"BAT" connection of the receiver.
• The power supply of the receiver (receiver battery or
speed controller with BEC) is connected to any output
of the receiver.
• Switch on the receiver. The receiver LED (2) starts to
flash quickly.
• Press the binding button at the receiver (see also figure
1, item 11) and keep the button pressed.
• Switch on the transmitter with the on/off switch with the
binding button pushed. The LED display in the transmit-
ter starts to flicker.
• When the LED in the receiver (2) flashes slowly after a
few seconds, binding has been completed.
• Release the binding button at the transmitter.
• Switch off the receiver and transmitter and remove the
programming plug.
• Re-connect the servos/controllers to the receiver.
• Check the function of the system.
If the system is not working properly, perform the pro-
cess again or check the digital code of the transmitter.
If you have switched the transmitter to the digital code "AFHDS" and bind an "AFHDS" receiver, the LED in
the receiver will not flash slowly but be lit permanently after binding.
Figure 17
Содержание HT-5
