16
5.6 Flying – Switching off
WARNING
Always turn off the aircraft before you turn off the remote controller to prevent accidents.
After the aircraft has landed and the propellers have stopped rotating do the following:
1.
On the aircraft, hold down the <Power> button until the lights go out.
2.
On the remote controller, hold down the <Power> button until you hear a beep and the lights go out.
3.
Remove the battery from the aircraft and let it cool down.
DANGER!
Keep the battery out of the reach of
children.
5.7 Flying – Using Return-To-Home
5.7.1 Introduction
Return-To-Home is a flight assistance feature: it returns the aircraft to base automatically. This is useful in case you
lose control or sight of the aircraft.
How it works after activation:
•
if the aircraft flies below 30 meters, the aircraft will automatically ascend to 30 meters before returning home.
•
if the aircraft flies above 30 meters, the aircraft will return home at the current altitude.
5.7.2 Activating
Activate and use the Return-To-Home function as follows:
1.
In Position Flight Mode, press the <One Key Return> button to activate Return-To-Home.
- A continous buzzer sounds.
- Do not control any functions during the process of return or ascent.
- If you want to cancel the function, hold down the <One Key Return> button until the buzzer stops.
2.
When the aircraft is landing, you can use the joystick to guide it to the desired landing position.
3.
After the aircraft has landed and the motors stopped, shut it off completely.
