Ensure the mains power
is turned off before wiring
the lifter and the light. It is
best to use a multimeter to
check before wiring.
Do not operate the lifter
when suspension wires are
tangled or twisted.
Make sure that no one is
standing underneath lifter
while it is operating.
Remote lighting lifter is
not to be used to lift items
not specified by the
manufacturer. Our
products are not to be
used in place of winches or
cranes.
Do not hold the suspension
cable or the light fitting
while operating.
Do not modify or paint it.
This will void the warranty
and may cause the system
to malfunction.
Avoid installation where there is high moisture, high wind, excessive dust, excessive vibration and/or corrosive gas.
Always use a licenced electrical contractor for installation work and ensure compliance with Australian
and local area standards.
3
Operation and Installation Cautions
