Control
Panel System Example
Control Switch
esting Procedure
Reeltech remote lighting lifter is also designed to be controlled from a hard wired panel. Following is a
typical layout for a manually controlled system.
NOTE: Signal cabling (Red, White, Black) This is installed onsite to control lifters as a hardwired system.
Must be rated to a minimum of 300V AC. (Even though they only carry signal and not voltage)
Do not connect any electric current to control switch wires (Red, White, Black). These wires are
only for signal from switches.
Do not connect Black, Red and White wires together.
Do not connect any voltage to the Black, Red and White wires.
Black+Red
Black+White
14
