Remote Control Unit (RCU)
To raise lifter
To lower lifter
Control button for lowering height
Functions-Remote Control Unit (RCU)
Select the unit code on the RCU then press to turn “ON”, press to turn “OFF” the light.
(Unit No.5 is an example in the boxes)
DOWN OPERATION
Select the unit code on the RCU and then press . To stop press .
Otherwise, lifter is designed to stop automatically at the preset position or after completion.
(Unit No.1 used as an example in the boxes)
NOTE: To adjust the lowering height (see page 13)
UP OPERATION
Select the unit code on the RCU and then press . To stop press .
Otherwise, lifter is designed to stop automatically and turns the light on once it reaches its
normal home position.
(Unit No.1 used as an example in the boxes)
Erase the value
Caution : • Do not hold or press the button continuously, it may cause it to reset the
lowering height program.
• Do not lower more than the maximum lowering distance shown on the
specifications table on page 18.
12
