REED ST-3347 Скачать руководство пользователя страница 5

reedinstruments

www

com

 Caution

•  Before making measurements ensure that the function selector switch 

is set on the appropriate range position.

•  Always make sure that the plug of each test lead is inserted fully into 

the appropriate terminal of the meter.

•  Ensure that the function selector switch is set to the “OFF” position 

after use. When the meter will not be in use for a long period of time, 

place it in storage after removing the battery.

•  Do not expose the meter to direct sunlight, extreme temperatures or 

moisture.

•  Do not use abrasives or solvents on the meter. To clean it use a damp 

cloth and mild detergent only. Only qualified and trained service techni

-

cians should perform calibration and repair of the meter.

For service on this or any other REED product, contact REED Instruments 

at [email protected].

Features

•  True RMS measurement of AC Current and AC Voltage
•  Large 4000 count LCD display with a bargraph and a bright white LED backlight.
•  Wide measuring range from 0.01A AC/DC up to 1000A AC/DC
•  Measures AC and DC Voltage up to 600 volts

•  Measures resistance from 0.01Ωup to 40MΩ.

•  Capacitance measurements up to 40mF
•  Temperature measurements from -40°C to +1000°C and -40°F to +1832°F
•  Designed to the international safety standard IEC61010 CAT III 600V / 

CAT II 1000V. Pollution degree 2.

•  Auto Power Off after approximately 20 minutes to conserve battery life.
•  Continuity Buzzer and Diode Test.
•  Frequency measurement up to 4kHz.
•  Peak Hold to record the minimum and maximum readings for current & voltage.
•  Data Hold switch used to freeze reading on display

Содержание ST-3347





















Отзывы: