reedinstruments
www
com
11
AC True RMS Voltage Measurement
1. Set the function switch to
range position.
2. Press the
MODE
button to select the AC Volt range.
The meter automatically defaults to DC Volts.
3. Insert the red test lead into the “
V Ω TEMP HZ
” input terminal
and the black lead to the “
COM
” terminal.
4. Connect the other end of the test leads to the circuit under test.
Take the reading on the display.
Notes:
• The meter is set to default to “Auto Range” mode
• Pressing the “
pEAK
” hold button will allow the user to record the peak
maximum and minimum readings on the AC volt range. See page 17 for
further instructions for “
pEAK
” Hold function.