REED ST-3347 Скачать руководство пользователя страница 4

reedinstruments

www

com

4

 Danger

•  Never use the meter to measure voltages on a circuit above the maxi-

mum allowable input value on any function.

•  Do not exceed the maximum allowable input of any measurement range.

•  Never touch exposed wiring, connections or any live circuit when at

-

tempting to take measurements.

•  Do not attempt to make measurements in flammable gaseous areas, 

fumes, vapor or dust. The use of the instrument in these areas may cause 
sparking, which can lead to an explosion.

•  Do not attempt to use the instrument if its surface or your hand is wet.
•  Never open the battery compartment cover when making measurements.

 Warning

•  Always inspect the meter and test leads for any signs of damage or  

abnormalities before use. If the meter or its accessories have any  

structural defects such as broken test leads, cracked cases, exposed 
metal parts or the display is not reading, do not attempt to make 

 

measurements.

•  Do not turn the function switch while test leads are connected to the meter.

•  Do not install substitute parts or make modifications to the meter. 

 

Return the meter to your distributor for repair or re-calibration. For 

service on this or any other REED product, contact REED Instruments 

at [email protected].

•  Ensure the meter is switched off before opening the battery cover when 

replacing the battery.

•  Never replace a battery if the surface of the meter is wet or moist.

Содержание ST-3347





















Отзывы: