
reedinstruments
www
com
7
Pantone 534 Blue
Pantone 123 Yellow
Pantone 485 Red
Pantone 123 Yellow
Pantone 534 Blue
Black
Rich Black -
20/20/20/100
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
Only if you REALLY need them:
Pantone 534 Blue - 100/80/30/5
Pantone 485 Red - 10/100/100/5
Pantone 123 Yellow - 0/27/100/
INSTRUMENTS
Zero Adjustment
To make precise measurements, the following zero adjustment procedures
should be executed:
1) Connect the Vibration Sensor to the Meter via the Vibration Sensor
Socket.
2) Select Acceleration measurement (m/s
2
, g, ft/s
2
)
3) Keep the vibration sensor motionless. Be sure there is no signal
being picked up.
4) Press and hold the Logger Button for at least 5 seconds. The
screen will display a zero value. The Zero Adjustment can be ex-
ecuted only when the measured value is less than 10 digits.
Max hold reset procedures
Under Max Hold function, press and hold the Logger Button for at least 5
seconds to clear the existing Max hold value.
Data Hold
While taking a measurement, press the Hold Button once and the mea-
sured value will hold on the screen, and a HOLD symbol will appear.
Press the Hold Button once again will release the data hold function.
Data Record (Max., Min. reading)
The data record function records the maximum and minimum readings.
Press the REC Button once to start the Data Record function and a “REC”
symbol will appear on the display. With the “REC” symbol on the display:
1) Press the REC Button once, and a ”REC. MAX.” symbol along with
the maximum value will appear on the display. To delete the maxi-
mum value, press the Hold Button once and the display will show
a “REC.” symbol only and execute the memory function continu-
ously.
2) Press the REC Button again, and a “REC. MIN.” symbol along
with the minimum value will appear on the display.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at: