REED R5040 Скачать руководство пользователя страница 9

9

www.REEDINSTRUMENTS.com

Diode and Continuity Measurements

1. 

Insert the black test lead into the negative COM terminal and the red 
test lead into the positive V diode terminal.

2. 

Turn the rotary function switch to the Ω position. Press the 

MODE

 

button until the Diode Test indicator appears on the display.

3. 

Touch the test probes to the diode under test. Forward voltage will 
indicate 0.4V to 0.7V. Reverse voltage will be indicated by "OL". 
Shorted devices will indicate near 0mV and an open device will be 
indicated by "OL" in both polarities. For continuity tests, if the  
resistance is <40Ω, a tone will sound.

Capacitance Measurements

1.  To avoid electric shock, disconnect power to the unit under test and 

discharge all capacitors before taking any capacitance measurements. 
Remove the batteries and unplug the line cords.

2.  Set the rotary function switch to the CAP position.
3.  Insert the black test lead into the negative COM terminal and the red 

test lead into the positive V terminal.

4.  Touch the test leads to the capacitor under test.
5.  The LCD will display the reading.

Frequency or % Duty Cycle Measurements

1.  Set the rotary function switch to the V position.
2.  Select ACV with the 

MODE

 button and press the 

Hz/%

 button to 

indicate "Hz" in the display.

3.  Insert the black test lead into the negative COM terminal and the red 

test lead into the positive V terminal.

4.  Touch the test probe tips to the circuit under test.
5.  The LCD will display the reading.

continued...

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Содержание R5040















Отзывы: