3
www.REEDINSTRUMENTS.com
Introduction
Thank you for purchasing your REED R5040 1000A AC/DC True RMS
Clamp Meter. Please read the following instructions carefully before using
your instrument. By following the steps outlined in this manual your meter
will provide years of reliable service.
Product Quality
This product has been manufactured in an ISO 9001 facility and has
been calibrated during the manufacturing process to meet stated product
specifications. If a certificate of calibration is required please contact the
nearest authorized REED distributor or authorized Service Center. Please
note an additional fee for this service will apply.
Safety
• Never attempt to repair or modify your instrument. Dismantling your
product, other than for the purpose of replacing batteries, may cause
damage that will not be covered under the manufacturer's warranty.
Servicing should only be provided by an authorized service center.
• Do not exceed the maximum allowable input range of any function.
• Do not apply voltage to the meter when resistance function is selected.
• Set the function switch
OFF
when the meter is not in use.
• Set the function switch to the appropriate position before measuring.
• When measuring volts do not switch to current/resistance modes.
• When changing ranges using the selector switch always disconnect the
test leads from the circuit under test.
• Do not exceed the maximum rated input limits.
• Improper use of this meter can cause damage, shock, injury or death.
• Read and understand this user manual before operating the meter.
• Always remove the test leads before replacing the battery.
• Inspect the condition of the test leads and the meter itself for any
damage before operating.
continued...
www.
GlobalTestSupply
.com
Find Quality Products Online at: