
8
www.REEDINSTRUMENTS.com
Operating Instructions
AC/DC Current Measurements
1.
Set the rotary function switch to the
1000ADC, 600ADC, 1000AAC, or
600AAC range. If the range needed
is not known, select the higher range
first then move to the lower range if
necessary.
2.
Press the trigger to the open jaw and
fully enclose one conductor.
3.
The LCD will display the reading.
AC/DC Voltage Measurements
1.
Insert the black test lead into the negative COM terminal and the red
test lead into the positive V terminal.
2.
Set the rotary function switch to the V position, and select either AC
or DC with the
MODE
button.
3.
Select Hz% or ACV with the
Hz%
button.
4. Connect the test leads in parallel to the circuit under test.
5. The LCD will display the reading.
Resistance Measurements
1.
Insert the black test lead into the negative COM terminal and the red
test lead into the positive V terminal.
2.
Set the rotary function switch to the Ω position.
3.
Touch the test probe tips across the circuit or component under test.
It is best to disconnect one side of the device under test so the rest
of the circuit will not interfere with the reading.
4.
The LCD will display the reading.
continued...
R5040
R5040
www.
GlobalTestSupply
.com
Find Quality Products Online at: