REED GM-600G, Руководство по эксплуатации, Страница: 7 / 10

4. MEASURING PROCEDURE
Power management
* Set the " Power Slide Switch " ( 3-7, Fig. 1 ) to the
" ON " position.
* Push and release the " Power Button " ( 3-4, Fig. 1 )
will power on the scale and the LCD will be light.
Push and release the " Power Button " again
will power off the scale and the LCD will be off.
* If the long period not intend to operate the scale,
it should set the Power Slide Switch " ( 3-7, Fig. 1 )
to the " OFF " position.
1)Considering the environment satiability, before the
operation it should let the scale stay the measurement
environment at least 10 minutes.
2)a. If intend to measure the weight of small particle or
liquid, then it can use the small container as the
interface.
b. Before make the measurement, put the container ( or
bowel ) on the platform as the interface, power on the
scale, push the " Tare Button " ( 3-3, Fig. 1 ), the
display will show " Zero " weight, then put the
weighting material ( or liquid ) into the container,
LCD will show the weight value.
3)Press the " MODE Button " ( 3-5, Fig. 1 ) once, it can
select the weight unit from g ( Gram ) to oz ( ounce ).
5