8
Operating Instructions
Power ON/OFF
1. To turn the instrument ON/OFF press the
button.
2. At power up, the LCD display will light up while displaying the symbols
shown below.
3. During that time, the instrument will also go through a quick internal
calibration and enter resistance measurement mode if it passes.
Refer to
Resistance Measurement Mode
for details.
Note:
The instrument automatically enters the resistance measurement
mode at start up regardless of the last saved setting.
4.
If the instrument does not pass calibration, the LCD display will indicate
"ER" as shown below.
Note:
This error could be caused by the clamp jaw not being properly
closed or from any dirt build up on the metal surface of the jaw clamp.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
