11
4. Repeat steps 1 to 3 to hold/store new values during testing.
Note:
When the memory is full, "MEM" will flash on the LCD display as
shown below.
Memory Recall
In order to recall the stored values, you must follow the steps below:
1. Press the
SAVE
button to enter memory recall mode and the first
stored value will be displayed.
2. Press the and arrows to scroll through the stored values.
3.
To clear the stored values, press the
SAVE
and
buttons simultaneously.
Note:
If no values are stored or if the memory is cleared the display will
appear as shown below.
4. Press the
SAVE
button to exit memory recall mode and resume
normal operation.
continued...
REED Instruments
1-877-849-2127 | [email protected] | www.reedinstruments.com
