Reed Instruments R2320, Инструкция по эксплуатации

Страница: 11 / 20

11
www.REEDINSTRUMENTS.com
Setting the High Temperature Alarm
Press the
SET
button once to enter the high alarm limit setup. Press
the button to toggle between alarm preset values as indicated by
P1-P5. Use the
UP
or
DOWN
buttons to set the temperature value within
selected the preset. Press the
UP
or
DOWN
buttons to add or subtract by
1 temperature value. Hold the UP or DOWN buttons to add or subtract by
10 temperature values. The instrument will exit the setup after 10 seconds
of inactivity or if the trigger is pulled at any time.
Setting the Low Temperature Alarm
Press the SET button twice to enter the low alarm limit setup. The meter
will automatically default to the previously selected preset. Use the
UP or DOWN buttons to set the temperature value within selected the
preset. Press the UP or DOWN buttons to add or subtract by 1 tempera-
ture value. Hold the UP or DOWN buttons to add or subtract by 10
temperature values. The instrument will exit the setup after 10 seconds of
inactivity or if the trigger is pulled at any time.
continued...
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com