Reece Atlantis Glacier SFK-GL-HR, Руководство по установке

Страница: 10 / 15

9
Any revisions must first be approved by the product designer. Version: 201808 Revision By: JST
GLASS RECEIVER CHANNELS MUST BE INSTALLED ONTO THE WATERPROOFING BEFORE
THE WALLS ARE TILED.
INSTRUCTIONS FOR
3 WALL SYSTEM
1. Choose door direction .
2. Position the glass receiver channels over
the base glazing channels. Use a straight
edge and mark wall to indicate where the
glass receiver channel is plumb.
3. Mask two sides of wall channel before
applying silicon. Apply a silicon seal to full
length of channel. Silicon used must be
compatible with anodised aluminium as
well as the waterproofing used.
4. Ensure the glass receiver channels are
located firmly over the base glazing
channels. The machine recess in the wall
glazing channel must firmly locate over
the base glazing channel. Locate the
framing timber. Use the 4mm drill bit to
drill holes through the glass receiver
channels. Fix four screws through the
channels into the wall framing (use wall
plugs if required).