12
13. Plug the wire on the Seat Handlebar (12) into the
indicated Receptacle (91).
Wire
12
15.
Make sure that all parts are properly tightened before you use the exercise bike.
Note: After assembly is
completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor.
16
17
Strap
Tab
14
14. Identify the Right Pedal (16), which is marked
with an “R.”
Using an adjustable wrench,
firmly tighten
the
Right Pedal (16)
clockwise
into the Right Crank
Arm (17).
Firmly tighten
the Left Pedal (not shown)
counterclockwise
into the Left Crank Arm (not
shown).
Adjust the right strap to the desired position, and
press the ends of the strap onto the tabs on the
Right Pedal (16).
Adjust the strap on the Left
Pedal (not shown) in the same way.
91
13
