Redwood Universal Gateway
Installation Instructions
Model No:
RG-2G-1RELAY
RG-2G-2RELAY
RG-2G-WH
The Redwood Universal Gateway turns on and off any light fixture type (e.g.
fluorescent, CFL, HID, LED, etc.). Installed on or next to each fixture, the Gateway
provides output signals to control one or two external dry contact relays. It
receives low-voltage power from, and communicates with, the Redwood Engine
via low-voltage cable. The Gateway does not require a Redwood Ready fixture
and will work with any fixture. It connects to a Redwood Sensor that transmits
data back to the Redwood Engine.