Redtronic BULLITT ADVANCED, Руководство пользователя

Страница: 7 / 26

M003 Issue: 1.5 Created by: Technical Dept. 6 February 2020
d) Apply the brown (Pattern Select) wire to +ve momentarily
e) Lamps will reduce in brightness
f) Release the grey wire
g) To revert back to default setting simply repeat the process
Note 25% Dim mode does not meet the requirements of the R65 candela (brightness)
specification
8.0 ECE R65 Monitor Output
The monitor output activates when the Lightbar is flashing with R65 compliance. Detected faults,
such as loss of communication to the board, will prevent the signal from activating. Any detected
fault will cause the LED to flash.
The minimum requirement for R65 compliance is activation of the end ‘angled’ modules in the
Lightbar, on full brightness. The monitoring output will therefore activate when these lamps are
performing correctly. If other lamps fail for any reason, the monitor output will still activate. This is
not a ‘full Lightbar monitor’.
The monitor output wire (white) can be connected to an external LED signal, buzzer or computer to
monitor ECE R65 compliance. This is a positive output that will drive upto 500mA at nominal voltage
supply. Please do not put a heavy load to this wire connection. When there is non-compliance to the
standard, the signal will deactivate.
9.0 Setting the Colour
This is not applicable to any lightbars built as ‘single colour’ only.
Setting Dil Switch 1 (located on the main internal motherboard) to ‘ON’ restricts the colour selection to 3 full
output colours only (i.e. whichever LED is mounted within lighthead). This will normally be set at the factory
on all Single and Dual colour models.
On Dual and Multi-Colour Lightbars, a colour can be set to each function as required by the user:
a) En sure the Lightbar is in ‘Standby’ mode
b) Apply the required input wire ( 360/1 or F1-F 9) to +ve permanently
c) Apply the white/pink (Colour select) wire to +ve momentarily until desired colour is set
d) To return to the first colour, apply the white/pink to +ve permanently for three (3)
seconds
Left Side Right Side Left Side Right Side
Colour 1 Blue Colour 7 Dark Amber
Colour 2 Amber Colour 8 Light Blue (Green tint)
Colour 3 Red Colour 9 Purple
Colour 4 Green Colour 10 American Amber (Green tint)
Colour 5 White Colour 11 Blue Red
Colour 6 Magenta (Pink) Colour 12 Red Blue