REDT R&D MAGIC-70 страница 14 Скачать руководство пользователя

Страница: 14 / 128

◈

Description on Keys

STOP

Once this button is pressed during engraving, all operations

in progress will stop.

VISE

If you press and hold the button, it enters into tool settings

mode. If you lightly press the button, the clamp moves back

and forth.

ROUND CHUCK

FINGER

If the button is lightly pressed, the laser point is moved to

round chuck finger Origin point.

If the button is pressed and held for more than one second

after the round chuck finger Origin point is changed, then the

changed Origin point will be saved.

FLAT CHUCK

FINGER

If the button is lightly pressed, the laser point with be moved

to flat chuck finger Origin point.

If the button is pressed and held for more than one second

after the flat chuck finger Origin point is changed, then the

changed Origin point will be saved.

DIRECTION KEY(A)

Make rotation clamp rotate.

※

During the rotation, it stops when it reach 0°, 90°, 180° or

270° location.

DIRECTION KEY(Z) Move Z axis to up and down

POINTER

Turns laser pointer ON/OFF.

START

If this button is pressed and held for more than one second

after engraving, then the data is sent and the area is

designated, engraving will start.

SAVE

If the button is pressed and held for more than one second

after the tool setting is changed, then the changed setting

value will be saved.

Enter the menu.

※

Please consult with engineers before to use this

function.

DIRECTION(X, Y)

It moves the tool or laser pointer.

During engraving, press

button to raise the speed by

one level, and press

button to slow down.

Содержание R&D MAGIC-70

































































































































Результаты поиска

Содержание R&D MAGIC-70

Отзывы:

Похожие инструкции для R&D MAGIC-70

Бренды по названию

Популярные бренды

REDT R&D MAGIC-70, Руководство пользователя

Результаты поиска

Содержание R&D MAGIC-70

Отзывы:

Похожие инструкции для R&D MAGIC-70

Бренды по названию

Популярные бренды