PART NUMBER
J130913
FITS Jeep Wrangler JK
07-17
Hi-Lift Jack Hood Mount Bracket
Installation Instruct
ions
KEY TO COMPONETS
A. 2 ea. Mounting bracket
B. 2 ea. U brackets
C. 2 ea. Wing nuts
D. 1 ea. Velcro strap
E. 2 ea. M10x1.0x40mm button head bolt
F. 4 ea. M8x1.25x30mm button head bolt
G. 4 ea. M8 flat washer
H. 4 ea. M8 split washer
I. 2 ea. M10 flat washer
J. 2 ea. M10 split washer
TOOLS NEEDED
10mm socket
#2Philip’s head
screw driver
A
Page 1
Please take a few minutes to read and thoroughly familiarize yourself with the installation procedures outlined
in this manual. Following the steps as outlined will save you time and help reduce mistakes. Once the
instructions are reviewed, if you feel that you are not capable of safely installing the parts seek the help of a
qualified installation expert to help you complete the job. The manufacture is in no way responsible for any
personal injury or vehicle damage that may occur during the installation.
.
California Proposition 65 Warning!
This product may contain lead a chemical known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more
information go to
www.P65Warnings.ca.gov
.
B
C
E
F
G
H
D
I
J
