Page 3
INSTALLING BRACKET ON REAR DOOR HINGE continued
Step 1.
Place supplied mounting bracket (A) onto Jeep. Line up
the bracket holes with the holes in the door hinge holes.
Step 2.
Place a supplied M8x1.25x30mm button head bolt with
supplied M8 flat washer (G) and supplied M8 split washer
(H) through the hole in the bracket through the hole in the
door hinge onto factory hood. Repeat step for remaining
bolt. Once all hardware is installed tighten down all
hardware. Repeat step 1-3 for remaining bracket.
This completes the installation.
