background image

 

 

 

 

 

 

       

WARRANTY CLAIMS 

 
Duratough 180 micron AF, Super D4 152 micron, Hortiplus X30 150 micron and other greenhouse films supplied by 
Redpath in New Zealand are backed with a Pro-rata Ultra Violet Warranty Only (see below).  Full details on warranty 
cover and conditions are available upon request.  Any warranty claims against these products should be directed in 
writing to your original supplier or Redpath Ideal Greenhouses Pty. Ltd. R.S.D 4 Rohs Road Bendigo East 3539, with 
details of purchase date, code number on film, information on your greenhouse design, type of crop & list of sprays 
used, film installation technique, 6 monthly maintenance records and nature of damage. 
 
 
The information contained herein is not intended to be all-inclusive and the manner and conditions of use and handling 
may involve other additional considerations.  Information herein may be modified or updated at any time & may not be 
reproduced without written permission from Redpath Ideal Greenhouses Pty. Ltd. 
 

U.V Warranty Periods 

– Applies from invoiced sale date 

Super D4,  42 month, U.V degradation, pro rata warranty (Twin skin applications) 
 

 

40 month, U.V degradation, pro-rata warranty (Single skin applications) 

Duratough   40 month, U.V degradation, pro-rata warranty 
Hortiplus 

30 month, U.V degradation, pro-rata warranty 

Polyweave  24 month, U.V. degradation, pro-rata warranty 
Solarweave 24 month, U.V. degradation, pro-rata warranty 
C/C 5000 

36 month, U.V. degradation, pro-rata warranty 

LMUV4 

40 month, U.V. degradation, pro-rata warranty 

LMUV5 

40 month, U.V. degradation, pro-rata warranty 

  

Other Film details on request 
 
 
 
 

                                                                                                                            
 
Issued as instructions with all Greenhouse Film & Lockstrip 

®

 Sales Since 1996 

 

 

 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание Domestic tunnelhouse Greenhouse 2.74


















Отзывы: