RedOne RO-DF6L, Руководство пользователя

Страница: 6 / 9

3) This process repeats to ensure temperature is constant.
5. The cover of tank is designed to keep pot clean and retain heat. Please
ensure no liquid is on the cover before use to minimize risk of spitting oil.
6. 1) The enclosed frying basket is for frying small food. There is hook and
handle on the basket.
2) Immerse the basket into oil when operating. When the frying is
finished, lift the basket and hang it on the front notch of tank to filter
oil.
7. After working, please rotate the temperature controller anti-clockwise to
the limit position and cut off power.
8. 1) Please make sure oil is cool before emptying tank.
9. 2) First, switch off power, then remove the element protection plate from
the tank, and then take the element out of the back notch in bottom
box. Once the electric box and element are separate from the tank
put them to one side and then empty out the oil.
10. The partition board of oil tank is designed for protecting electric heating
element. Put the protection plate into the oil pot when frying food.
11. 1) There is temperature min/max control. The maximum temperature is
230
º
; reset temperature is less 170
º
.
2) There is “reset button for over heating”. Press the reset button to
restart.
12. There is micro-limit switch in the power box.
13. Please change oil regularly. Do not use old oil because it will have a
reduced flash-point and be more prone to surge boiling.
D. Notes for installation
1. The using voltage for this equipment must be coordinated with the
supplied voltage.
2. User should install a suitable power switch and breaker switch near the
fryer.
3. At the back of the equipment is the earth bolt. Please connect the earth
wire in compliance with the safety regulations with copper cable of no
less that 2mm².
4. Before using, check every connection, that voltage is normal and
ground connection is safe.
5. Do not use water to clean the electric box.
6. This fryer must be installed by qualified engineers.